Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
73
Environment.Input[2].State[0].Level
Parameter
Dry contact Config
1: Open makes just informational 0 into State.
2: Open makes Warning trap.
3: Open makes Alarm trap.
-
RW
Environment.Input[2].State[1].Level
Parameter
Dry contact Config
1: Close makes just informational 0 into State.
2: Close makes Warning trap.
3: Close makes Alarm trap.
-
RW
Environment.OverHumidity[1].Threshold
Parameter
d%
RW
Environment.OverHumidity[2].Threshold
Parameter
d%
RW
Environment.OverHumidity[3].Threshold
Parameter
d%
RW
Environment.OverHumidity[4].Threshold
Parameter
d%
RW
Environment.OverTemperature[1].Threshold
Parameter
d°K
RW
Environment.OverTemperature[2].Threshold
Parameter
d°K
RW
Environment.OverTemperature[3].Threshold
Parameter
d°K
RW
Environment.OverTemperature[4].Threshold
Parameter
d°K
RW
Environment.PresentStatus.CommunicationLost
AlarmL1
0: OK
1: Communication failure with the sensor probe or probe
not present.
-
RO
Environment.PresentStatus.OverHumidity
AlarmL1
0: No threshold triggered
1: Warning low threshold triggered
2: Critical low threshold triggered
3: Warning high threshold triggered
4: Critical high threshold triggered
-
RO
Environment.PresentStatus.OverTemperature
AlarmL1
0: No threshold triggered
1: Warning low threshold triggered
2: Critical low threshold triggered
3: Warning high threshold triggered
4: Critical high threshold triggered
-
RO
Environment.PresentStatus.Present
Measure
0: Sensor probe never connected since F/W starts.
1 : Sensor probe connected at least 1 time since F/W
starts.
-
RO
Environment.Temperature
Measure
Measured Temperature on environmental monitoring
probe.
It is 0 when no probe is connected.
d°K
RO
PDU.DaisyChain[x].ChangedStatus.CommunicationLost
Timestamp
Communication with daisy chained device has failed,
datation of the alarm.
s
RO
PDU.DaisyChain[x].iName
String[15]
Daisy chain friendly name
-
RO
PDU.DaisyChain[x].PresentStatus.CommunicationLost
AlarmL1
Communication with daisy chained device has failed.
-
RO
PDU.Gang.Count
Constant
Number of factory groups in the PDU.
-
RO
PDU.Gang[x].ActivePower
Measure
Active Power provided by the breaker/section. For a double
pole breaker, the apparent power for the two poles is
combined.
dW
RO
Table 8. ePDU CLI Objects (Continued)
XML Object Name
Type
Description
Unit
Access