Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
104
4.
In the main page, review ePDU monitoring data.
NOTE
The phase information that displays reflects the ePDU model. For example, the
number of phases that display depends on whether the ePDU is a single-phase,
split-phase, or three-phase model. The phase labels also change depending on
whether the model is a delta-wired or a wye-wired model.
NOTE
Roll the cursor over an outlet icon to see the type of outlet and the status (On or
Off).
5.
To modify ePDU voltage and current threshold values, click the
Settings
button. The Settings dialog
displays.
6.
To enter new threshold values, type new values in any of the text boxes that follow, then click
Save
:
l
Low warning current threshold
l
High warning current threshold
l
High critical current threshold
l
Low critical voltage threshold
l
Low warning voltage threshold
l
High warning voltage threshold
l
High critical voltage threshold
7.
To reset the threshold values to the default values, click
Default
, then click
Save
.
8.
To reset a kWh (kilowatt hour) counter to zero, click
Reset kWh
, then click
Save
.
NOTE
If you do not save the action, the kWh counter remains unchanged.
9.
To reset the maximum power counter to zero, click
Reset Max Power
, then click
Save
.
10. To cancel this action and return to the Overview page, click
Cancel
.
Groups
NOTE
In the toolbar,
Turn On/Off Groups
will only appear for Switched and Managed
ePDUs.
Review/Modify ePDU Groups
1.
Access the Web interface and log in.
2.
Under Power Management, select Groups. The Groups page displays.
3.
Review basic monitoring information for Groups measurement settings.
NOTE
Click the red arrow next between the Current (%Load) and the voltage columns to
see additional Branch Circuit outlet information.