Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
78
PDU.Input[1].Phase[x].Statistic[5].Energy
HideMeasure
Energy counter since last reset. When it is reset to 0 then
at the same time the related timestamp is updated with
the current RTC value.
Wh
RO
PDU.Input[1].Phase[x].Statistic[5].ModuleReset
Command
-
RW
PDU.Input[1].Phase[x].Statistic[5].Reset.Energy
HideMeasure
Energy counter saved at last reset. When it is reset, at the
same time the related timer updated with PDU timer since
1st restart.
Wh
RO
PDU.Input[1].Phase[x].Statistic[5].Reset.Time
HideMeasure
Timestamp saved at the moment where the energy counter
related to is reset.
s
RO
PDU.Input[1].Phase[x].Voltage
Measure
Voltage Measurement.
cV
RO
PDU.Input[1].PowerFactor
Measure
Ratio of active power / apparent power provided by the
input.
Value 0 to 100 for Cos PHI = 0.00 to 1.00
m%
RO
PDU.Input[1].PresentStatus.FrequencyOutOfRange
AlarmL1
0: Frequency OK
1: Frequency is out of +/- 3Hz tolerance
-
RO
PDU.Input[1].ReactivePower
Measure
Reactive Power Measurement.
It is the accumulation of 1 or 3 phase measures.
dVA
R
RO
PDU.Input[1].Statistic[3].ActivePower
Measure
Power peak consumption since last reset.
As it is reset to 0, the related timestamp is updated with
the current RTC value.
When a value higher than the stored value is detected, the
stored valued is overwritten.
dW
RO
PDU.Input[1].Statistic[3].ModuleReset
Command
Command to Reset the stat. This command puts 0 in the
max and saves the current value of Timer into the data
…Timer and into ...Reset.Timer.
-
RW
PDU.Input[1].Statistic[3].Reset.Time
Measure
Timestamp saved at the moment when the statistic is
reset.
s
RO
PDU.Input[1].Statistic[3].Time
Measure
Timestamp saved at the moment when the statistic is
reset.
s
RO
PDU.Input[1].Statistic[4].Energy
Measure
Energy counter since last reset. As it is reset to 0, the
related timestamp is updated with the current RTC value.
It combines the energy consumed on 1 or 3 phases.
Wh
RO
PDU.Input[1].Statistic[4].ModuleReset
Command
Command to Reset the stat. This command does not put 0
in the counter, but it saves the current value of Energy
timer into the data ...Reset.Energy.
s
RW
PDU.Input[1].Statistic[4].Reset.Energy
Measure
Energy saved at the instant the user resets the stat.
Wh
RO
PDU.Input[1].Statistic[4].Reset.Time
Measure
Timestamp saved at the instant the user resets the stat.
s
RO
PDU.Input[1].Statistic[5].Energy
Measure
Energy counter since last reset. When it is reset to 0 then
at the same time the related timestamp is updated with
the current RTC value.
It cumulates the energy consumed on 1 or 3 phases.
Wh
RO
PDU.Input[1].Statistic[5].ModuleReset
Command
Command to Reset the stat, this command does not put 0
in the counter but saves the current value of Energy timer
into the data ...Reset.Energy.
s
RW
Table 8. ePDU CLI Objects (Continued)
XML Object Name
Type
Description
Unit
Access