Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
77
PDU.Input[1].Phase[x].ChangedStatus.OverVoltage
Timestamp
Timestamp of last changing state of the alarm that has the
same name in the collection PresentStatus.
s
RO
PDU.Input[1].Phase[x].Current
Measure
Current Measurement.
mA
RO
PDU.Input[1].Phase[x].OverCurrent[1].Threshold
Parameter
mA
RW
PDU.Input[1].Phase[x].OverCurrent[3].Threshold
Parameter
mA
RW
PDU.Input[1].Phase[x].OverCurrent[4].Threshold
Parameter
mA
RW
PDU.Input[1].Phase[x].OverVoltage[1].Threshold
Parameter
cV
RW
PDU.Input[1].Phase[x].OverVoltage[2].Threshold
Parameter
cV
RW
PDU.Input[1].Phase[x].OverVoltage[3].Threshold
Parameter
cV
RW
PDU.Input[1].Phase[x].OverVoltage[4].Threshold
Parameter
cV
RW
PDU.Input[1].Phase[x].PeakFactor
Measure
Crest factor of the current provided by the phase.
m%
RO
PDU.Input[1].Phase[x].PercentLoad
Measure
Percent load consumed on the phase. It is the ratio: current
consumed / the nominal current of the PDU.
%
RO
PDU.Input[1].Phase[x].PhaseID
Constant
Phase ID identifier depending of the wiring:
1: Line 1 to Neutral
2: Line 2 to Neutral
3: Line 3 to Neutral
12: Line 1 to Line 2
23: Line 2 to Line 3
31: Line 3 to Line 1
-
RO
PDU.Input[1].Phase[x].PowerFactor
HideMeasure
Ratio of active power / apparent power provided by the
phase.
Value 0 to 100 for Cos PHI = 0.00 to 1.00
m%
RO
PDU.Input[1].Phase[x].PresentStatus.OverCurrent
AlarmL1
0: No threshold triggered
1: Warning low threshold triggered
2: Critical low threshold triggered
3: Warning high threshold triggered
4: Critical high threshold triggered
-
RO
PDU.Input[1].Phase[x].PresentStatus.OverVoltage
AlarmL1
0: No threshold triggered
1: Warning low threshold triggered
2: Critical low threshold triggered
3: Warning high threshold triggered
4: Critical high threshold triggered
-
RO
PDU.Input[1].Phase[x].ReactivePower
HideMeasure
Reactive Power Measurement.
dVA
R
RO
PDU.Input[1].Phase[x].Statistic[4].Energy
HideMeasure
Energy counter since last reset. As it is reset to 0, the
related timestamp is updated with the current RTC value.
Wh
RO
PDU.Input[1].Phase[x].Statistic[4].ModuleReset
Command
-
RW
PDU.Input[1].Phase[x].Statistic[4].Reset.Energy
HideMeasure
Energy counter saved at last reset. As it is reset, the
related timer updated with PDU timer since 1st restart.
Wh
RO
PDU.Input[1].Phase[x].Statistic[4].Reset.Time
HideMeasure
Timestamp saved at the moment when the related energy
counter is reset.
s
RO
Table 8. ePDU CLI Objects (Continued)
XML Object Name
Type
Description
Unit
Access