Easy xLogic, User Manual

Page: 70 / 226

68 68 68 68
The view in parameter assignment mode (example):
Timing
Timing Timing
Timing diagram
diagram diagram
diagram
Description
Description Description
Description of
of of
of the
the the
the function
function function
function
The time Ta (the current time in xLogic) is triggered with the 0 to 1 transition at input Trg.
If the status at input Trg stays 1 at least for the duration of the configured time T, the output
is set to 1 when this time has expired (the on signal of the output follows the on signal of the
input with delay).
The time is reset if the status at input Trg changes to 0 again before the time T has expired.
The output is reset to 0 when input Trg is 0.
4 4 4 4.4.2 .4.2 .4.2 .4.2 Off-delay Off-delay Off-delay Off-delay
Short Short Short Short description description description description
The output with off delay is not reset until a defined time has expired.
Connection Connection Connection Connection Description Description Description Description
Input Trg Trg Trg Trg Start the off delay time with a negative edge (1 to 0
transition) at input Trg (Trigger)
Input R
R R
R Reset the off delay time and set the output to 0 via the R
(Reset) input.
Reset has priority over Trg
Parameter T: T: T: T: The output is switched off on expiration of the delay
time T (output signal transition 1 to 0).
Retentivity Retentivity Retentivity Retentivity on = the status is retentive in memory.
Output Q Q Q Q Q is switched on for the duration of the time T after a
trigger at input Trg.