Easy xLogic, User Manual

Page: 25 / 226

23 23 23 23
1. Mounting brackets
2. Mounting lock
3. Cabinet door or control panel (Thickness:1.5 to 8.5 mm)
5. You can then use the ELC-COVER-CABLE
ELC-COVER-CABLE ELC-COVER-CABLE
ELC-COVER-CABLE to connect the ELC-HMI-FP
ELC-HMI-FP ELC-HMI-FP
ELC-HMI-FP to the ELC-12 Basic
module up to a distance of 1.5 meters. This distance can be extended to up to ten meters by
using a standard Sub-D cable together with the
ELC-COVER-CABLE ELC-COVER-CABLE ELC-COVER-CABLE ELC-COVER-CABLE .
2.2 2.2 2.2 2.2 Wiring Wiring Wiring Wiring the the the the xLogic xLogic xLogic xLogic
Wire the xLogic using a screwdriver with a 3-mm blade.
You do not need wire ferrules for the terminals. You can use conductors with cross-sections of up
to the following thicknesses:
� 1 x 2.5 mm
2
� 2 x 1.5 mm
2
for each second terminal chamber
� Tightening torque: 0.4.. .0.5 N/m or 3. ..4 lbs/in
Note Note Note Note
Always cover the terminals after you have completed the i n s t a l l a t i o n . To pr o t e c t xL o g i c
a d e q u a t e l y fr o m impermissible contact to live parts, local standards must be complied with.