Easy xLogic, User Manual, Page: 143 / 226

141 141 141 141
（
output
）
06 06 06 06 Pre-set the data of single register
（
40000
～
4XXXX
）
Set single output register
15 15 15 15 Force multi-coils on/off bit
（
00000
～
0XXXX
）
16
16 16
16 Write multi-holding registers data
（
40000
～
4XXXX
）
4. where is to save the pre-configuration data that would be written to Slave. It contains 2 kind
ways to pre-configuration. One is auto mode ,this data uses the flags in the program ,such as
FM, AFM ,I, Q and AQ. The manual mode is intput a fixed value or bit status.
Example Example Example Example 1 1 1 1
Write the I2 bit status of Master xLogic to Slave xLogic with No.1 and control Q1 of Slave via
RS485 port. the program of master can be made as follows:
I1of master is used to control the communication .If I1 is high and the communication is