Sample Management
97
RENAME SAMPLE
001 Untitled Sample
[0-9]/Encoder/Kybd
5. Press ENTER to exit the submodule.
The ESI-32 will return to the
Module Identifier.
Individual samples can be erased from the bank, and newly created
samples in memory can be erased using this function.
1. Activate Sample Management module.
2. Select Submodule 3.
3. Select the sample to be erased, then press ENTER.
ERASE SAMPLE
001 Current Sample
Select a Sample
4. If the sample is stereo, select whether you want to erase the left
side, right side, or the entire stereo sample.
ERASE SAMPLE
001 Selected Sample
Side: Stereo
Select L/R/Stereo
5. Decide if you really want to erase the sample.
The ESI-32 will
inquire if you are sure.
6. Press Yes to erase the sample, or No to cancel the operation.
In
either case the ESI-32 will return to the Module Identifier.
3. Erase
Sample
Summary of Contents for ESI-32
