manualshive.com logo in svg

E-Mu ESI-32, Operation Manual

Share
Download
E-Mu ESI-32 Operation Manual Download Page 66

58

ESI-32 Operation Manual

Erasing a bank erases ALL the memory in the ESI-32, which includes all
samples and presets.

1. Activate Master/Global module.

2. Select Submodule 3.

3. Decide if you really want to erase the bank.

 The display will

inform you that you are about to erase all samples and presets in the
current bank.

    ERASE BANK
Erases All Presets,
    and Samples!
  Are You Sure? Y/N

4. Press Yes to erase the bank or No to cancel the operation.

 In

either case, the ESI-32 will return to the Module Identifier.

This function (when on) bypasses the channel assignments made in the
Output Channels submodule of the Dynamic Processing module, and
allows all of the ESI-32's 32 channels to be assigned in a circular manner
as needed. (Channels are assigned in ascending, circular order as notes
are played, i.e. 30, 31, 32, 1, 2, 3…)

1. Activate Master/Global module.

2. Select Submodule 4.

3. Select whether dynamic allocation is On or Off.

DYNAMIC ALLOCATION

Mode:            off
   Select on/off

4. Press ENTER to exit the submodule. 

The ESI-32 will return to the

Module Identifier.

3. Erase

Bank

4. Dynamic

Allocation

✱

 

Tip:

 After erasing the bank, the ESI-32

will automatically create an empty bank for
you.

Summary of Contents for ESI-32









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands