manualshive.com logo in svg

E-Mu ESI-32, Operation Manual

Share
Download
E-Mu ESI-32 Operation Manual Download Page 157

Digital Processing

149

7. Doppler/Pan

This function allows you to apply either a pre-programmed or user-
definable sound path to a mono sample or the left side of a stereo
sample. The result is a stereo sample with pitch shifted and left-right
gains adjusted according to the path. The sound can move dramatically
forward-back and left-right in a 2-D space in front of the listener. Several
pre-programmed paths and up to 10 user-definable paths are available
with up to 26 points per path.

1. Activate Digital Processing module.

2. Select 8. Digital Tools II, 7. Doppler/Pan (8/7). 

The display will

show the current path, level threshold and Doppler status.

    DOPPLER/PAN
Path:   small circle
Doppler:          on
Threshold:     -44dB

3. Select the desired Path for the Doppler/Pan. 

The lower line of the

display changes to show the resulting length of the compressed or
expanded sample. The choices are:

Fast-by (L->R)

Sound moves left to right quickly

Slow-by (L->R)

Sound moves left to right slowly

Far->Near (fast)

Sound moves far away to close quickly

Far->Near (slow)

Sound moves far away to close slowly

Near->Far (fast)

Sound moves close to far away quickly

Near->Far (slow)

Sound moves close to far away slowly

Small Circle

Sound moves in an 8 ft. circle in front

Medium Circle

Sound moves in a 50 ft. circle in front of you

Large Circle

Sound moves in a 120 ft. circle in front of you

Huge Circle

Sound moves in a 250 ft. circle in front of you

Random 1

Sound moves in a random path in front of you

Random 2

Sound moves in a different random path

User Path 1-10

Sound moves in a user-programmed path

The pre-computed paths are always initially scaled to the length of the
sample, although this time may be changed using the Duration param-
eter (read on). The 10 user-defined paths are saved along with the bank
so that they may be applied to other samples over multiple-user ses-
sions.

4. Turn Doppler Pitch Shift On or Off.

 With Doppler turned Off,

only the panning effect will be enabled.

Summary of Contents for ESI-32









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands