E-Mu ESI-32, Operation Manual

Page: 31 / 232

Controls
23
4. Use a MIDI footswitch to advance through the presets.
5. Use a MIDI program change command. Presets 000-127 can be
accessed via a MIDI program change command. Presets 128-255 can
be accessed using a MIDI bank select command, followed by a
program change.
See the MIDI Implementation Chart in the Appendix.
To see the current preset number at any time, de-activate any active
module and look at the display.
A bank consists of presets and samples. The Save function saves this data
from the ESI-32's memory bank to the floppy disk, hard disk or other
external SCSI device.
1. Press Save.
2. If necessary, select the drive to which the bank will be saved.
The ESI-32 will default to the current drive. If you want to choose a
different drive, place the cursor under the drive number in line two,
select the appropriate drive and press ENTER.
SAVE BANK into
D1 Internal HD
Select a Drive
3. Select the bank number to which the bank will be saved, then
press ENTER. The approximate size of the bank will be displayed on
line four. Empty banks are indicated as such, along with their bank
number on line three. Or, you can overwrite an existing bank.
SAVE BANK into
D1 Internal HD
B00 Stereo Grand
7.8MB in Bank
4. After pressing ENTER the bank will be saved. A bar graph will
appear in the display showing the progress of the save operation.
The display will revert to the preset selection screen.
A bank consists of presets and samples. The Load function loads this
data into the ESI-32's memory bank from the floppy disk, hard disk or
other external SCSI device.
1. Press Load.
2. If necessary, select the drive containing the bank to be loaded.
The ESI-32 will default to the current drive. If you want to choose a
different drive, place the cursor under the drive number in line two,
select the appropriate drive and press ENTER.
Save Bank
Load Bank