manualshive.com logo in svg

E-Mu ESI-32, Operation Manual

Share
Download
E-Mu ESI-32 Operation Manual Download Page 163

Digital Processing

155

9. Undo

!

 

Caution:

 

The Undo function will not work

unless you have a hard disk drive connected.

Have you ever wanted a time machine so that you could go back and
undo a mistake? This function may be the next best thing.

To Restore A Sample To Its Original State:

1. Activate Digital Processing module.

2. Select Submodule 9.

UNDO  TRUNCATION
001  Selected Sample

Backup:      enabled

The display will show whether backup is currently enabled or not. If
backup is not enabled, you will not be able to restore the sample.
Otherwise, press ENTER. The original sample will be restored, the
processed sample will be stored in the clipboard, and the ESI-32 will
return to the Module Identifier.

To Compare a Processed Sample with the Original Sample:

1

. Activate Digital Processing module.

2. Select Submodule 9.

REDO  TRUNCATION
001  Selected Sample

Backup:      enabled

The display will show whether backup is currently enabled or not. If
backup is not enabled, you will not be able to compare samples. Other-
wise, press ENTER. The original sample will be restored, the processed
sample will be stored in the clipboard, and the ESI-32 will return to the
Module Identifier.

3. Re-select Submodule 9.

 The processed sample will be restored, and

the original sample will be stored in the clipboard. You can continue
switching back and forth between the processed and original
samples by repeating this step until you decide which sample you
want to keep.

It is best to use Undo ONLY when you have a fixed hard disk drive
installed on the SCSI bus. If you have only removable hard disks
installed and remove the one containing the backup data, the ESI-32
may become confused. The ESI-32 will select a fixed hard disk as the
backup drive, if available. If you have only removable disks and still
want to use Undo, insert one removable disk in the drive. 

Mount

Drives in the Master menu sets the Undo device. 

Leave the

removable disk in the drive until you have finished all DSP operations.

WARNING

Summary of Contents for ESI-32









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands