168
ESI-32 Operation Manual
Sample 1
Sample 2
Sample 3
ZONE
Sample 4
If you just want to select the existing zone, simply press ENTER when
the display asks you for the high key. The entire zone will be selected.
The second line shows the note being played on the keyboard (or
scrolled with the data entry control). After selecting a note, the third line
displays the primary sample number, and the fourth line displays the
secondary sample number associated with the note on line two.
EDIT ASSIGNMENT
Zone: C1 to C2
Original Key: G1
Edit Low Key
6. Edit the assignment, then press ENTER.
The display shows the
zone range (typically the low and high notes of a particular sample)
and the original key. Use the cursor buttons to select parameter(s) to
edit, and select keys by using the keyboard or data entry control.
In
this screen you set the new zone assignment.
If you extend the
new zone so that it overlaps another sample on the same layer, it will
replace the other sample in that area of the keyboard. After pressing
ENTER the ESI-32 will edit the zone range and the original key, and
then return to the Module Identifier.
APPLICATION:
Adjust the range of a sample.
1. Activate Preset Definition module.
2. Select Submodule 2.
3. Select the proper layer, then press ENTER.
If there are only
primary or secondary samples, the ESI-32 will automatically go to
step four.
4. Select the lowest note of the desired zone using the data
entry control, then press ENTER.
The data entry control scrolls
through the lowest note of each sample on the keyboard.
5. When the display asks for the highest note of the zone,
simply press ENTER.
6. Edit the zone's range.
Do not change the original key. (It need
not be within the range of the zone.) If you are extending the
range of a sample, the other samples will move to make room for
the new zone.
New Zone Range
New Original Key
Summary of Contents for ESI-32
