Guided Tours
53
Pitch Change
Finally we're getting to the fun stuff! Pitch Change allows you to change
the pitch of a sample without changing the time relationship between
events.
1. Take a sample of your voice speaking… anything.
2. Activate the Digital Processing module.
3. Select Submodule 0, Select Sample.
Since you may have multiple
samples in memory at this point. Use the Select Sample function to
pick the one you want to Pitch Change. Use the data entry knob to
select the samples, then press ENTER. Each sample will be placed
over the entire keyboard range.
4. Select 8, Digital Tools II, 5. Pitch Change (8/5).
The display
shows:
PITCH CHANGE
Tune: -700cts
Type: mid-2
Set the Tune control to about +700 cents (a perfect fifth up). Set the Type
to mid-2. The pitch change Type is not critical, but mid-2 seems to work
well for voice. Press Enter to begin the pitch change.
If you have a hard disk connected, the ESI-32 will automatically back up
your sample before processing it. If you don't like the resulting pitch
change, press Digital Processing, Undo.
Summary of Contents for ESI-32
