manualshive.com logo in svg

E-Mu ESI-32, Operation Manual

Share
Download
E-Mu ESI-32 Operation Manual Download Page 129

Digital Processing

121

This function allows you to choose the sample to be processed. The
resulting current sample will remain as designated until you either select
a different sample, change presets, or load another bank. While in the
Digital Processing module, the current sample will be placed over the
full keyboard range, and all other samples will be muted.

1. Activate Digital Processing module.

2. Select Submodule 0.

3. Select a sample to be processed. 

As you scroll through non-empty

samples, the display will show the sample number, name, sampling
rate sample length, how many presets use the sample and whether
or not the sample is stereo, left or right. Also, as you scroll, each
sample will be playable on the keyboard over its entire available
range.

   SELECT SAMPLE
001 Piano C6
Stereo      44100 Hz
5 Presets   1.6 secs

4.Press ENTER to exit the submodule. 

The ESI-32 will return to the

Module Identifier.

This submodule lets you turn looping on and off,, loop in release on and
off and sets various parameters concerning other Digital Processing
functions. For more information, see Background: About Looping at the
beginning of this section.

1. Activate Digital Processing module.

2. Select Submodule 1.

3. Select Loop Enable On/Off on line two.

       SETUP
Loop enable:      on
Loop in Release:  on

Your choices are:

•

Off:

 The loop is disabled and the sample plays as recorded.

•

On:

 The sample plays normally until it reaches the end of the loop.

It then jumps back to the start point and replays through the loop.
Upon reaching the loop end, it again re-plays the loop. This looping
process continues for as long as the key is pressed.

0. Select

Sample

1. Setup

Loop

!

 

Caution:

 Samples imported from the EIII

having forwards/backwards loops will play
back on the ESI-32, however the loop data
will be permanently modified to contain the
forwards/backwards sound data. Changing
the loop points on imported forwards/
backwards loops could have unpredictable
results and is not recommended.

Summary of Contents for ESI-32









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands