40
ESI-32 Operation Manual
4. Select page three of the LFO controls.
The display will show:.
LFO
LFO->Pitch: 0%
LFO->Cutoff 0%
If the LFO settings aren’t to your liking, use the left cursor/page button
to change the LFO rate, delay, and variation
The Auxiliary Envelope
1. Select 5. Auxiliary Envelope.
The display shows the first page:
AUXILIARY ENVELOPE
Dest: off
Envelope Amt: 0%
Move the cursor under Destination on line two, and use the data entry
control to scroll through the auxiliary envelope destinations. Select Pitch
as the destination, then set the Envelope Amount to -50%.
2. Select the next page using the right cursor.
Set the parameters so
that the display looks like this:
AUX Attack: 0.00s
Hold: 0.00s
Decay: 0.40s
Sus:00% Rel:1.65s
Now play the keyboard. Since we are using an inverted envelope, notes
will bend up to pitch and then hold there. This is an effect common in
many natural sounds.
Vary the various envelope parameters, and observe the effect these
changes have on the sound.
Summary of Contents for ESI-32
