manualshive.com logo in svg

E-Mu ESI-32, Operation Manual

Share
Download
E-Mu ESI-32 Operation Manual Download Page 177

Preset Definition

169

APPLICATION:

 Transpose a Zone

1. Activate Preset Definition module.

2. Select Submodule 2.

3. If there are both primary and secondary samples, select Both,

then press ENTER.

 If there are only primary or secondary

samples, the ESI-32 will automatically go to step four.

4. Select the lowest note of the desired zone using the data

entry control, then press ENTER.

 The data entry control scrolls

through the lowest note of each sample on the keyboard.

5. Use the data entry control to select the highest note of the

zone, then press ENTER.

 The data entry control scrolls through

the highest note of each sample on the keyboard.

6. Edit the original key to transpose the zone. 

The original key

need not be within the range of the zone. As an example, moving
the original key down from G1 to G-0 would result in the zone
being transposed up one octave. Moving the original key up from
G1 to G2 would transpose the zone down one octave.

APPLICATION:

 Transpose Part of a Zone.

Suppose you wanted to transpose the area marked by the arrows
down an octave to create a Snare of Doom sound. Here's how.

Reverb Snare

Tom

Crash Cymbal

Kick

New

Zone

1

2

1. Activate Preset Definition module.

2. Select Submodule 2.

3. If there are both primary and secondary samples, select Both,

then press ENTER.

 If there are only primary or secondary samples,

the ESI-32 will automatically go to step four.

4. Select the note marked by arrow 1 using the keyboard, then

press ENTER.

5. Select the note marked by arrow 2 using the keyboard, then

press ENTER.

6. Edit the original key to transpose the zone. 

Move the cursor

down to the third line of the display, then use the inc/dec buttons to
select a new original key. Moving the original key up transposes
down and vice-versa. Press ENTER. Only the new zone will be
transposed. Everything else remains as before.

Summary of Contents for ESI-32









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands