manualshive.com logo in svg

E-Mu ESI-32, Operation Manual

Share
Download
E-Mu ESI-32 Operation Manual Download Page 146

138

ESI-32 Operation Manual

This submodule contains eight more digital functions. These are ex-
tremely useful utilities for manipulating samples. Following is a short
description of each function.

0. Sample Rate Convert:

 Converts the sample to any sample rate

between 7000 Hz and 50000 Hz.

1. Digital Tuning:

 Digitally re-tunes a sample within a range of 

±

1

octave.

2. Compressor:

 The compressor dynamically changes the gain of the

sample based on the amplitude envelope of the sample. This is a
non-realtime implementation of a full featured dynamic range
compressor.

3. Parametric Equalizer:

 This is a digital (non real-time)

implementation of a one band parametric EQ, with +12 dB boost or
-48 dB of cut and completely variable frequency and bandwidth
controls.

4. Time Compression:

 This function changes the length of a sample

without changing the pitch. This can be very useful for fitting
samples to the beat of a song or fitting dialog into a spot. Samples
can be compressed or expanded in length from 50% to 200%.

5. Pitch Change:

 This function changes the pitch of a sample without

changing the time relationships between events. The maximum
amount of pitch change is 

±

1200 cents (

±

 one octave).

6. Transform Multiplication:

 This function merges two sounds

together in a unique way which can create many strange and
beautiful sonic textures. Frequencies common to the original sounds
are accentuated while uncommon frequencies are discarded.

7. Doppler/Pan:

 This unique function allows you to dramatically move

a sound from front to back and side to side in a 2-D space. Several
pre-computed paths as well as 10 user-definable paths are available.

8. Digital

Tools II

Summary of Contents for ESI-32









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands