manualshive.com logo in svg

E-Mu ESI-32, Operation Manual

Share
Download
E-Mu ESI-32 Operation Manual Download Page 95

Master/Global

87

10. Use the inc/dec buttons or the data entry control to select the

Program.

 Press ENTER to load and convert a single program. “All”

allows you to load and convert all programs in the volume. Selecting
“None” allows you to load samples only.

   AKAI LOAD from
P:A  Vol:PIANOS
Program:FullGrand
   Select Program

If “All” is selected, the following screen will appear:

   AKAI LOAD from
P:A  Vol:PIANOS
Program:**ALL**
Overwrite Bank?  Y/N

Programs and samples may be loaded into a new bank (Overwrite Bank
= Yes) or merged with the existing bank (No).

11. Press Yes to overwrite the current bank or No to merge the

programs with the existing bank. 

Loading will begin immediately.

   AKAI LOAD from
P:A  Vol:PIANOS
Program:**NONE**
   Select Program

If “None” is selected, the following screen will appear:

   AKAI LOAD from
P:A  Vol:PIANOS
Sample: **ALL**
   Select Sample

12. Use the inc/dec buttons or the data entry control to select the

Sample. Press ENTER to load and convert a single sample.

•

“All” allows you to load and convert ALL samples in the
volume.

If “ALL” is selected, the overwrite bank message (as above) will appear,
allowing you to either overwrite the bank or merge the samples with the
current bank.

!

 

Caution:

 If a converted preset NAME

already exists in the current bank, two
presets may be created with the same name,
even though they might be different.

Summary of Contents for ESI-32









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands