Dynapac Svedala Demag EB 34 Series, Operation & Maintenance Manual

Page: 80 / 90

F 10
F_E
B
34_VB340
_05.
08_G
B.
fm
10-
18
6.3 Check / adjust tamper deflector plate
Before each laying operating, check the
tamper adjustment.
There should be a clearance (a) of 0.7
mm over entire width between tamper
deflector plate (4) and tamper knife (5).
A
If correction is necessary: See chapter
E.
6.4 Hydraulic hoses
- Specifically check the condition of the
hydraulic hoses.
- Replace any damaged hoses immedi-
ately.
f
Aged hoses become porous and may
burst! Danger of accidents!
A
A number stamped onto the threaded
connection provides information about
the date of manufacture (A) and the
maximum pressure permitted for this
hose (B).
m
Never fit overlapped hoses and note the
permissible pressure level.
Leitblech2_340.jpg
a
4
5
Hyd_VB610RH.eps
DHH 09/00 225 BAR
A B