Dynapac Svedala Demag EB 34 Series, Operation & Maintenance Manual

Page: 57 / 90

E 1
E_EB3
4_VB340
__05.
08_G
B.
fm
-14 02-
05.
08
E Set-up and modification
1 Notes regarding safety
f Inadvertent starting of the paver finisher can endanger persons working on the
screed.
Only carry out such work with the finisher motor at a standstill unless the instruc-
tions state the opposite!
Make sure that the paver finisher is secured against being put into operation.
f When lifted, the screed can still slide downwards if the mechanical screed transport
safeguard is not inserted on the finisher.
Only carry out work when the screed is secured by mechanical means!
f When connecting or disconnecting hydraulic hoses and when working on the hydrau-
lic system, hot hydraulic fluid can spurt out at a high pressure.
Switch off the engine and de-pressurise the hydraulic system! Protect your eyes!
Always install extension parts and conversion parts in the proper manner! If in doubt,
contact the manufacturer!
Mount all protective devices before re-commissioning the paver finisher.
The walking platform must always reach over the entire width of the screed.
The hinged walkway plate (option) may only be folded up under the following condi-
tions:
- If the machine has to be backed up very closely to a wall or another obstacle,
- During transportation on a low-bed trailer.