Dynapac Svedala Demag EB 34 Series, Operation & Maintenance Manual

Page: 71 / 90

F 1
F_E
B
34_VB340
_05.
08_G
B.
fm
1-
1
8
F Maintenance
1 Notes regarding safety
f
Inadvertent starting of the paver finisher can endanger persons working on the
screed.
Only carry out such work with the finisher motor at a standstill unless the instruc-
tions state the opposite!
Ensure that the finisher is secured to prevent unintentional starting.
f
When lifted, the screed can still slide downwards if the mechanical screed transport
safeguard is not inserted on the finisher.
Only carry out work when the screed is secured by mechanical means!
- Replace spare parts, or have them replaced, properly.
! ATTENTION!
Components bearing this symbol may only be opened, check and re-
placed by specialist electricians!
f
Monitoring and repair work on electrical systems with medium levels
of voltage, e.g. the screed heating system, may only be carried out
by specialist electricians or persons instructed in electrical engineering work when us-
ing the appropriate test equipment.
Always comply with relevant technical electrical protection precautions. Danger to life
as a result of accidents involving medium voltage levels!
m
Parts and spare parts that have not been approved by the manufacturer, unsuitable
tools and incorrect installation can cause malfunctions, damage to property or failure
of safety devices and can endanger persons.
Use only approved parts and install them according to the specifications! If in doubt,
contact the manufacturer!
- Properly re-install all protective devices before re-commissioning the paver finish-
er.