Dynapac Svedala Demag EB 34 Series, Operation & Maintenance Manual

Page: 60 / 90

E 4
E_EB3
4_VB340
__05.
08_G
B.
fm
-14 02-
05.
08
2.3 Hydraulic connections
The hydraulic connections are on the rear of the finisher.
f
When installing the hydraulic connections, hot hydraulic oil can spurt out under high
pressure.
Switch off the engine and de-pressurise the hydraulic system! Protect your eyes!
m
When installing the hydraulic connections, make sure the environment is absolutely
clean.
Dirt in the hydraulic oil can cause the machine to fail!
A
The connections present depend on the screed equipment.
Position and designation of the connections:
Item Designation
1 Tamper pump (O)
2 Tamper return –> tank (O)
3 Vibration pump
4 Vibration return –> tank
5 Extend screed, left
6 Retract screed, left
7 Extend screed, right
8 Retract screed, right
Rück2_F6.wmf
5
1 2
6
4 3
8 7