Dynapac Svedala Demag EB 34 Series, Operation & Maintenance Manual

Page: 15 / 90

A 1
A_0
1_GB.
fm
1
-2
A Correct use and application
A
The “Guidelines for the Correct Use and Application of Paver finishers” compiled by
Dynapac are included in the scope of delivery for the present machine. The guide-
lines are part of the present operating instructions and must always be heeded. Na-
tional regulations are fully applicable.
The road construction machine described in the present operating instructions is a
paver finisher that is suited for laying mixed materials, roll-down concrete or lean-
mixed concrete, track-laying ballast and unbound mineral aggregates for foundations
for paving.
This machine shall be used, operated and maintained for the purpose of the intended
work as included in the operation manual. Any other use is regarded as improper use
and can cause injury to persons or damage to the paver finisher or other equipment
or property.
Any use going beyond the range of applications described above is regarded as im-
proper use and is expressly forbidden! Especially in those cases where the paver fin-
isher is to be operated on inclines or where it is to be used for special purposes
(construction of dumps, dams), it is absolutely necessary to contact the manufacturer.
Duties of the user: A “user” within the meaning of the present operating instructions
is defined as any natural or legal person who either uses the paver finisher himself,
or on whose behalf it is used. In special cases (e.g. leasing or renting), the user is
considered the person who, in accordance with existing contractual agreements be-
tween the owner and the user of the paver finisher, is charged with the observation
of the operating duties.
The user must ensure that the paver finisher is only used in the stipulated manner and
that all danger to life and limb of the operator, or third parties, is avoided. In addition
to this, it must be ensured that the relevant accident prevention regulations and other
safety-related provisions as well as the operating, servicing and maintenance guide-
lines are observed. The user must also ensure that all persons operating the equip-
ment have read and understood the present operating instructions.
Mounting of attachments: The paver finisher must only be operated in conjunction
with screeds that have been approved by the manufacturer. Mounting or installation
of any attachments that will interfere with or supplement the functions of the paver fin-
isher is permitted only after written approval by the manufacturer has been obtained.
If necessary, the approval of local authorities has to be obtained.
Any approval obtained from local authorities does not, however, make the approval
by the manufacturer unnecessary.