Dynapac Svedala Demag EB 34 Series, Operation & Maintenance Manual

Page: 33 / 90

D 3
D_E3
4_VB340_
05.
08_G
B.
fm
3-
26
- 01.
01.
07
2.2 Adjusting the tamper (
o
)
The tamper function is switched on and
off using the switch (2) on the finisher's
operating panel (see finisher operating
instructions). (
o
Pavers equipped with
PLC system: Button (2a))
The tamper frequency (number of
strokes a minute) is set using the speed
regulator for the tamper (4). This can be
found on the railing on the left-hand side
of the machine (under heating switch
cabinet).
Adjustment range:
0 – 1500 rpm =
0 – 25 strokes a second
Adjusting the vibration
The vibration function is switched on and off using the switch (3) on the finisher's op-
erating panel (see finisher operating instructions).
The speed regulator for vibration (5) can be found on the railings on the right-hand
side of the machine (separator fluid system holder).
Adjustment range:
0 – 3300 rpm =
0 – 55 strokes a second
Tamperswitch.bmp/Vibrationswitch.bmp
2
3
VibDrehz340.wmf/TampRPM340.wmf
5
4