Dynapac CP275, Instruction Manual

Page: 20 / 115

Special instructions
12
4812273203.pdf
2017-08-25
High pressure cleaning
Do not spray water directly onto electrical components
or the instrument panels.
Place a plastic bag over the fuel filler cap and secure
with a rubber band. This is to avoid high pressure water
entering the vent hole in the filler cap. This could cause
malfunctions, such as the blocking of filters.
Fire fighting
If the machine catches fire, use an ABC-class powder
fire extinguisher.
A BE-class carbon dioxide fire extinguisher can also
be used.
Roll Over Protective Structure (ROPS), ROPS
approved cab
If the machine is fitted with a Roll Over
Protective Structure (ROPS, or ROPS approved
cab) never carry out any welding or drilling in the
structure or cab.
Never attempt to repair a damaged ROPS
structure or cab. These must be replaced with new
ROPS structure or cabs.
Battery handling
When removing batteries, always
disconnect the negative cable first.