Dynapac CP275, Instruction Manual

Page: 111 / 115

Additional instruction
103
4812273203.pdf
2017-08-25
Fig 1. Instrument panel – Air gauge
Fig 2.
Fig 3.
Fig 4. 1. Lock nut; 2. Valve element
3.Valve body
Fig 5.
Air on the run (Optional)
Before starting
Check the air pressure from the air gauge on
instrument panel, it should be in 380kPa – 780kPa.
(fig1).
Check the air valve status:
In general, the air valves are closed when the roller is
shipped out from factory. So if use the air on the run
system, open the gas valve first on each tires.
Fig 2, Fig 3
How to open / close the air valve
Open the air valve
- Loosen the lock nut of the air valve using a wrench;
Fig 4
- Loosen the lock nut of the air valve using a flat screw
driver; Fig 5