Dynapac CP275, Instruction Manual

Page: 74 / 115

Maintenance – 10h
66
4812273203.pdf
2017-08-25
Fig. Hydraulic reservoir
Fig. Expansion tank
1. Filler cap
2. Level marking
3. Protective plate
4. Bolt
Hydraulic reservoir - Check fluid level
The filler pipe and sight glass are on the left side of the
fan cover in the engine compartment.
Place the roller on a level surface and check that the
oil level is between the max and min markings. Top up
with the type of hydraulic fluid specified in the lubricant
specification, if the level is too low.
Coolant level – Check
The expansion tank is placed in the middle, between
the operator platform and the engine compartment.
Refilling takes place from over the black cover
between the operator platform and the hood.
To access the expansion tank you have to remove the
protective plate (3) via two bolts (4).
Check that the coolant level is between the max. and
min. marks (2).
Observe great caution if the cap has to be
opened while the engine is hot. Wear protective
gloves and goggles.
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specification in these instructions
and the engine manual.
Flush the system every year and change
the coolant. Also check that the air has
unobstructed passage through the reservoir.
For further details, refer to the engine’s instruction
manual.