Dynapac CP275, Instruction Manual

Page: 97 / 115

Maintenance – 500h
89
4812273203.pdf
2017-08-25
Fig. Left side of frame
1.Tank cap
Maintenance – 500h
Park the roller on a level surface.
When checking and making adjustments to the
roller, switch the engine off and make sure the
Forward/Reverse lever is in the Neutral position.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors.
Risk of carbon monoxide poisoning.
Hydraulic reservoir – Check
Unscrew and make sure that the reservoir cap is not
clogged. Air must have unobstructed passage through
the cap in both directions.
If passage in either direction is blocked, clean the filter
with a little diesel oil and blow through with
compressed air until the block is removed, or replace
the cap with a new one.
.
Wear protective goggles when working
with compressed air or high-pressure water jets.
1