Dynapac CP275, Instruction Manual

Page: 70 / 115

Maintenance –Maintenance schedule
62
4812273203.pdf
2017-08-25
Pos.
in fig
Action Comment
1, 2 Change the engine oil and oil filter Refer to the engine manual
3 Change the fuel filter Refer to the engine manual
Cleaner cooler
Drain fuel water seperator Refer to the engine manual
Check the engine belt drive system Refer to the engine manual
14 Check the battery condition
16 Inspect the air conditioning Optional
Check the air conditioner compressor belt Optional
17 Lubricate lower pivot bearing
18 Lubricate upper pivot bearing
20 Check the oil level in the rear axle
23 Drive chain maintenance
Drain air tank
Retighten wheel nuts
Check bolted joints
Lubricate the steering chain
Pos.
in fig
Action Comment
1, 2 Change the engine oil and oil filter Refer to the engine manual
3 Change the fuel filter Refer to the engine manual
Cleaner cooler
Change the fuel prefilter Refer to the engine manual
7 Check hydraulic oil tank cap
9 Clean the air cleaner
Check the engine belt drive system Refer to the engine manual
14 Check the battery condition
16 Inspect the air conditioning
Check the air conditioner compressor belt Optional
17 Lubricate lower pivot bearing
18 Lubricate upper pivot bearing
20 Check the oil level in the rear axle
23 Drive chain maintenance
Every 250 hours of operation (Monthly)
Refer to the contents to find the page number of the
sections referred to!
Every 500 hours of operation (Every three months)
Refer to the contents to find the page number of the
sections referred to!