Dynapac CP275, Instruction Manual

Page: 77 / 115

Maintenance – 10h
69
4812273203.pdf
2017-08-25
Fig 1. Tank cap
Fig. Wheel rank
1. Water tank
2. Sprinkler nozzle
Water tank, Std – Filling
There are two filler caps on the top of the tank.
Unscrew the tank cap (1) and fill with
clean water. Do not remover the strainer.
Fill the water tank; it holds 600 liters.
Only additive: A small amount of
environment-friendly antifreeze.
Sprinkler system – Check
Fill the tank with emulsion fluid, e.g. water mixed with
2% cutting fluid. Check that the sprinkler nozzles (2)
are not blocked, and if necessary clean them and the
filter. See under Sprinkler system, Check – Cleaning,
for detailed instructions.
Inspect the tire treads from time to time to
ensure that no asphalt has stuck to the tires. This
can happen before the tires have warmed up.
Fluids that are flammable or detrimental to
the environment must not be used in the emulsion
tank.
1
1
2