Dynapac CP275, Instruction Manual

Page: 102 / 115

Maintenance – 1000h
94
4812273203.pdf
2017-08-25
Fig. Driving gearbox – Replenishing
oil
2.Filler plug
3. Level plug
Driving gear - Replenishing the oil
Move the machine so that the filler hole is correctly
positioned. The hole should be just over the horizontal
position to simplify filling.
Unscrew the filler plug (2). Unscrew the level plug (3)
as well to evacuate air. Oil is filled from the filler well.
Fill up with approx. 20 l (21 qts) of new oil. Use
transmission oil, see lubricant specifications.
Move the machine so that the level plug (3) is in
horizontal position.
Ensure that the oil level reaches up to the lower edge
of the plug hole.
Clean and refit the plugs.
Propulsion pump filter – Replace
Check the propulsion pump filter, replace of
necessary.
3 2