Dynapac CP275, Instruction Manual

Page: 101 / 115

Maintenance – 1000h
93
4812273203.pdf
2017-08-25
Fig. Cab, front
1. Fresh air filter (x1)
2. Screw (x2)
Fig. Wheel gear
1. Drain plug
2. Filler plug
Cab
Fresh air filter - Replacing
There is one fresh air filter (1), placed on the front of
the cab.
Remove the protective cover.
Undo the screws (2) and remove the complete holder.
Remove the filter insert and replace with a new filter.
The filter may need to be changed more often if the
machine is operated in a dusty environment.
Wheel gear – Oil change
Take great care when draining the fluid.
Wear protective gloves and goggles.
Note: When filling and draining the gear oil
and checking the level of gear oil, always park the
roller on a level surface.
Place a receptacle that holds at least 20 liters (5.3 gal)
under the drain plug.
Unscrew the drain plug (1) and filler plug (2) to
evacuate air. Allow all the oil to drain out and refit the
plug.
Deliver the drain oil to environmentally
correct handling.
1
2
2
1 2