Dynapac CP275, Instruction Manual

Page: 63 / 115

Preventive maintenance
55
4812273203.pdf
2017-08-25
Preventive maintenance
Complete maintenance is necessary for the
machine to function satisfactorily and at the lowest
possible cost.
The Maintenance section includes the periodic
maintenance that must be carried out on the
machine.
The recommended maintenance intervals assume
that the machine is used in a normal environment
and working conditions.
Acceptance and delivery inspection
The machine is tested and adjusted before it
leaves the factory.
On arrival, before delivery to the customer,
delivery inspection must be conducted as per the
check list in the warranty document.
Any transport damage must be immediately
reported to the transport company.
Warranty
The warranty is only valid if the stipulated delivery
inspection and the separate service inspection
have been completed as per the warranty
document, and when the machine has been
registered for starting under the warranty.
The warranty is not valid if damage has been
caused by inadequate service, incorrect use of the
machine, the use of lubricants and hydraulic fluids
other than those specified in the manual, or if any
other adjustments have been made without the
requisite authorization.