Dynapac CP275, Instruction Manual

Page: 78 / 115

Maintenance – 10h
70
4812273203.pdf
2017-08-25
Fig. Nozzle
1. Sleeve, nozzle, filter
2. Packing
Sprinkler system
Cleaning of sprinkler nozzle
Dismantle the blocked nozzle by hand.
Blow the nozzle and fine filter (1) clean using
compressed air. Alternatively, fit replacement parts
and clean the blocked parts later on.
Nozzle Colour Ø (mm) l/min gal/min
(2.0 bar) (40 psi)
Standard yellow 0.8 0.63 0.2
Option blue 1 1 0.31
Option red 1.2 1.25 0.39
Option brown 1.3 1.63 0.5
After inspecting and carrying out any necessary
cleaning, start the system and check that it works.
Unscrew the tank cap (1) and fill with clean
water. Do not remover the strainer.
Fill the water tank; it holds 600 liters.
Wear protective goggles when working
with compressed air.
1
2