Dynapac CP275, Instruction Manual

Page: 45 / 115

Operation
37
4812273203.pdf
2017-08-25
Operating the roller
Under no circumstances is the
machine to be operated from the ground. The
operator must be seated inside the machine
during all operation.
Check that the steering is working correctly by
turning the steering wheel once to the right and
once to the left while the roller is stationary.
When compacting asphalt, remember to turn on
the sprinkler system.
Make sure that the area in front of and
behind the roller is clear.
In below there are some speed recommendation
according to different working conditions:
First gear speed (tortoise):
Used for variety different material session
Used for climbing working condition
Second gear speed (rabbit):
Used for transportation
Speed selecting
While roller is stationary, change the
direction or change gears.
When the tire temperature is low, from
time to time to check tire surface to ensure
whether asphalt mixture stuck to the tire, sprinkle
water or oil on the tire could effectively prevent this
problem.
Fig 1. Speed selector
1