GBK60027 DX-SLM Installation Manual Issue 5
4. Calibrate the Motor Speed Parameter.
VIEW/EDIT SERVO MOD
Max motor speed
calibration
EXIT
NEXT
START
Press 'START'.
The steering wheels move to their left and right extremes, then return to centre.
Press ‘NEXT’.
This calibration should be performed with the normal weight on the chair i.e. while
sitting on the chair.
5. Calibrate the Restrictor Plate (Restrict Fwd/Rev Spd) Parameters.
This procedure calibrates the speed for four forward and four reverse turning
positions.
VIEW/EDIT SERVO MOD
Restrictor plate
calibration
EXIT
NEXT
START
Press 'START'.
VIEW/EDIT SERVO MOD
Trace joystick
outline
EXIT
SAVE
Move the joystick around the outer physical extremities of the restrictor plate.
Ensure that all corners are pressed into.
Press ‘SAVE’ to return to the previous screen.
6. Press ‘NEXT’ to return to
or if calibration has been completed,
press 'EXIT' to return to
, then ‘NEXT’.
Unplug the HHP and turn off the DX System.
Note:
‘NEXT’ must be pressed in screen
so that the calibration settings are
saved to both the SLM and the DX Remote.
Page 42
M
T
