GBK60027 DX-SLM Installation Manual Issue 5
7.2.2.3
Turning Deceleration
Parameter
Possible Values Default
HHP Lite Std Adv
Turning Deceleration
15 - 100 %
70 %
The rate of response when the joystick is deflected left or right towards neutral. A
value of 15% gives slow response, 100% gives fast response.
This defines the rate at which the SLM attempts to respond to a large decrease in
steering lock. A small decrease in lock demand is approached at the maximum
possible deceleration. The lock demand at which this parameter is used is set by the
Wizard in the SLM wheelchair program, by the Turning Acceleration Point parameter.
Note:
The Turning Deceleration value is normally set as high or higher than the
Turning Acceleration value. An inadequate Turning Deceleration value can
result in an unsafe wheelchair condition.
Page 28
M
T
