DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Page: 89 / 130

Programming
Service Instructions 878-M PREMIUM - 03.0 - 10/2019 87
17.6.6 Setting the Programs (
Programs
) parameter
Various settings can be made for the programs. The options are explained
in more detail in the table.
17.6.7 Setting the Electronic handwheel (
JogDial
) parameter
The electronic handwheel can be activated or deactivated.
Menu item Setting option
Forward Sound
Sound when changing between two seam sections.
(Value range On/Off)
Seg.Switch
A switch between two seam sections is usually carried out with the
►
button. This function can also be assigned to Position -2 on the
pedal.
(Value range On/Off)
Notice:
Position -2 actually causes a cancellation when activated during
seam section. If the section change function is assigned to Position -2,
the softkey menu can be used for a cancellation (it is still possible to
continue sewing from that point; for a full cancellation of the program,
press the pedal in Position -2 again).
Abort Mode Position
After the cancellation, the needle is merely brought to its
end position and the thread is trimmed (if activated).
Seg.Eng
Ending the program with all configurations that are set for
this seam section.
Thread Trim
The thread trim becomes active or remains inactive when a seam
section is canceled.
(Value range On/Off)
Pedal Abort
Abort a program by pressing the pedal in Position -2 twice.
(Value range On/Off)