DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Page: 94 / 130

Programming
92 Service Instructions 878-M PREMIUM - 03.0 - 10/2019
Test Ana.Input
subitem
1. Select the desired element with the 
/
 in the
Input
field.
2. Activate the selected element.
3. Observe the display on the control panel.

If the element is functional, the corresponding value is displayed.
Test Auto Input
subitem
Fig. 62:
Test Auto Input
(Test of the automatic input) subitem
In this subitem, you can carry out the same tests as under
Test Input
,
however, without having to select the element beforehand via the display.
To perform the test steps:
1. Activate the element.

In
Input
, the display shows the number of the element last changed.
If the element is functional, the display switches between
On
and
Off
under
Value
.
Test Sew. Motor
( Test of the sewing motor ) subitem
Use this subitem to test the functionality of the sewing motor.
To check the sewing motor:
1. Press the OK button.

The machine performs a reference run.
2. In the Speed field, use the

/

buttons to enter a speed in steps of 100.
Fig. 63:
Test Sew. Motor
(Test of the sewing motor)
3. Press the OK button to confirm the input.

The sewing motor runs at the entered speed.
4. To end, press the OK or ESC button.
Value :
Input :
Speed :
Sewing Motor
200