DURKOPP ADLER 878-M PREMIUM Service Instructions Manual Download Page 104

Page: 104 / 130

Programming

102

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

11. Press the

button to confirm the selection.

12. Press the

►

button; the selection

Destination

Select All

Deselect All

appears.

13. Select the

Destination

option with the

▲

▼

buttons.

14. Press the

button to confirm the selection.

15. Select the desired folder with the

▲

▼

buttons or press the

►

button

and create a new folder with the

Create Folder

(New folder) option.

16. Press the

button to confirm the selection.

17. Use the numeric buttons to enter the folder name.

18. Press the

button to confirm the name.

19. Press the

►

button and select the

Copy

option.

20. Press the

button to confirm the selection.



The data transfer begins and a message appears, stating that the
USB key must not be removed.

Fig. 75: USB key warning



The message disappears after the data transfer.

17.12 Selection of tension plate type

To change the tension plate type must be selected the machine class (

Ma-

chineClass

). Can be choose from these types:

• Electronic

• Rotary

• Mechanic

Change of tension plate type can be done at any time in this way:

Hold the

button pressed down, and at the same time switch on the

machine with the main switch.

Use the numeric buttons to enter the code

85627

Select the menu

MachineClass

Select the class

878

and the appropriate subclass.

Select the tension plate type.

Don´t remove USB!

Please Wait!

Summary of Contents for 878-M PREMIUM



































































































































Search results

Summary of Contents for 878-M PREMIUM

Reviews:

Related manuals for 878-M PREMIUM

Brands by name

Popular brands

DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Search results

Summary of Contents for 878-M PREMIUM

Reviews:

Related manuals for 878-M PREMIUM

Brands by name

Popular brands