DURKOPP ADLER 878-M PREMIUM Service Instructions Manual Download Page 62

Page: 62 / 130

Integrated motor

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

16 Integrated motor

16.1 Disassembling the motor

16.1.1 Disassembling the handwheel and handwheel flange

Fig. 50: Disassembling the handwheel and handwheel flange

Loosen all three screws (2) on the handwheel (1).

Loosen all threaded pins (3) and remove the handwheel flange (4).

DANGER

Risk of injury from electricity!

Unprotected contact with electricity can result in
serious injuries or death.

Work on the electrical system must ONLY be carried
out by qualified electricians or appropriately trained
and authorized personnel.
ALWAYS pull the power plug before working on the
electrical equipment.

WARNING

Risk of injury from moving parts!

Crushing possible.

The machine may only be disassembled and
assembled by trained specialists.

(1)

- Handwheel

(2)

- Screws

(3)

- Threaded pins

(4)

- Washer

①

②

④

③

Summary of Contents for 878-M PREMIUM



































































































































Search results

Summary of Contents for 878-M PREMIUM

Reviews:

Related manuals for 878-M PREMIUM

Brands by name

Popular brands

DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Search results

Summary of Contents for 878-M PREMIUM

Reviews:

Related manuals for 878-M PREMIUM

Brands by name

Popular brands