DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Page: 76 / 130

Programming
74 Service Instructions 878-M PREMIUM - 03.0 - 10/2019
17.5.3 Setting the Speed (
Speed
) parameter
Various settings can be made for the speed. The options are explained in
more detail in the table.
17.5.4 Setting the Stop positions (
StopPositions
) parameter
Various settings can be made for the stop positions. The options are
explained in more detail in the table.
Menu item Setting options
Max. Speed
Maximum permissible speed; it can no longer be exceeded at the
operator level.
(Value range 0500 – 2,500 [rpm])
Min. Speed
Minimum speed at which an individual stitch is made; a lower speed
is no longer possible at the operator level.
(Value range 050 – 400 [rpm])
Pos. Speed
Position speed; the last stitch is made at a slower speed during the
stopping of the sewing procedure.
(Value range 010 – 700 [rpm])
Soft Speed
Speed for a soft start.
(Value range 0010 – 1000 [rpm])
N Stitches
Number of stitches to be made during a soft start.
(Value range 00 – 10)
Acceleration
Acceleration ramp (sewing motor)
Deceleration
Deceleration ramp (sewing motor)
Menu item Setting options
StopBottom°
Holding position of the needle in the material.
Value range (000 – 359)
Threading°
Position for the proper function of the threader, e.g. with the thread lever
at the top dead center.
Value range (000 – 359)
StopTop°
Holding position of the needle outside of the material.
Value range (000 – 359)
StopIdle°
Stop position after thread trimming (reversal position).
Value range (000 – 359)