DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Page: 69 / 130

Programming
Service Instructions 878-M PREMIUM - 03.0 - 10/2019 67
17.4 Program presetting (
DefaultProgram
) submenu
Customer-specific settings can be made here, which are automatically
used as preset values for the first seam section during the creation of a
new program. Select the values so that they can be retained for as many
programs as possible.
The menu is divided into the following submenus:
17.4.1 Setting the Stitch length (
StitchLength
) parameter
The stitch length that should be set as standard when creating a new
program.
To set the stitch length parameter:
1. Select the
StitchLength
parameter
2. Press the OK button to confirm the selection.
3. Enter the desired value (00.0 – 7.0 mm) based on the maximum stitch
length T3010
4. Press the OK button to confirm the value.
Parameter Explanation Reference
Stitch Length
Stitch length

p. 67
Foot Press.
Foot pressure

p. 68
Thr.Tens.
Needle thread tension

p. 68
FullnessType
Fullness type

p. 68
Fullness
Fullness degrees

p. 69
Start Tack
Start bartack

p. 69
End Tack
End bartack

p. 69
Thread Trim
Thread Trim

p. 69
DailyPieces
Daily piece counter

p. 70
NOTICE
Property damage may occur!
The machine and the sewing equipment may be damaged.
ALWAYS adjust the stitch length to the selected sewing equipment.