DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Page: 80 / 130

Programming
78 Service Instructions 878-M PREMIUM - 03.0 - 10/2019
17.5.10 Setting the Pedal (
Pedal
) parameter
Various settings can be made for the pedal. The options are explained in
more detail in the table.
17.5.11 Setting the Needle cooling (
NeedleCooling
) parameter
Various settings can be made for needle cooling. The options are
explained in more detail in the table.
Menu item Setting options
Type DA Analog/Digital
Choice between an analog and digital pedal.
Inverted
Inversion of the signals given by the pedal (possibly necessary for
digital setpoint devices).
(Value range On/Off)
N StepsPedal
Number of speed steps processed by the pedal.
(Value range 00 – 64)
Curve
Speed curve of the pedal.
t Posit.-1
Debouncing of position -1
(Value range 000 – 255 [ms])
t Posit.-2
Debouncing of position -2
(Value range 000 – 255 [ms])
t Posit.0
Debouncing of position 0
(Value range 000 – 255 [ms])
Menu item Setting options
Off
Needle cooling is deactivated.
On
Needle cooling is activated.
t Delay
Lag time, after which the needle cooling is deactivated.
(Value range 00.0 – 10.0 [ms])
Speed t Delay
Lag time, after which the needle cooling is deactivated.
(Value range 00.0 – 10.0 [ms])
Speed
Speed at which the needle cooling is activated.
(Value range 0000 – 6000 [rpm])
EdgeTrimmer
Needle cooling is activated when the edge cutter is also activated.
t Delay
Lag time, after which the needle cooling is deactivated.
(Value range 00.0 – 10.0 [ms])