DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Page: 105 / 130

Programming
Service Instructions 878-M PREMIUM - 03.0 - 10/2019 103
17.13 Perform software update
When a new software version is available, this can be downloaded from
www.duerkopp-adler.com and loaded into the control via a USB key.
All settings on the machine are retained.
To load software via a USB key:
1. Switch off the machine with the main switch.
2. Plug the USB key into the socket (1) on the control (2).
Fig. 76: Perform software update
3. Switch on the machine with the main switch.

The machine automatically starts the software transfer. During the
transfer, the display only shows the firmware version (3) of the control
panel on the left.
Fig. 77: Perform software update

As soon as the software update is finished, the display will also show
the software version (4) of the machine on the right.
(1) - Connection (2) - Control
(3) - Firmware version
①
②
OP3000
A03
2014-11-27
③