DURKOPP ADLER 878-M PREMIUM Service Instructions Manual Download Page 15

Page: 15 / 130

Working basis

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

Working basis

3.1

Order of the settings

Order

The setting positions for the machine are interdependent.

Always comply with the order of individual setting steps as specified.

It is absolutely essential that you follow all notices regarding prerequisites

and subsequent settings that are marked with

in the margin.

3.2

Laying the cable guide

Ensure that all cables are laid in the machine such that the function of the
moving parts is not hampered.

Lay any excess cabling neatly in proper cable snakes.

Bind the cable loops together with cable ties.

Important

Tie the loops wherever possible to fixed parts.
The cables must be secured firmly.

Cut off any overlapping cable ties.

NOTICE

Property damage may occur!

Risk of machine damage due to incorrect order.

It is essential to follow the working order specified in these
instructions.

NOTICE

Property damage may occur!

Excess cables can impair the functioning of moving machine parts.
This impairs the sewing function and can result in damage.

Lay excess cable as described above.

Summary of Contents for 878-M PREMIUM



































































































































Search results

Summary of Contents for 878-M PREMIUM

Reviews:

Related manuals for 878-M PREMIUM

Brands by name

Popular brands

DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Search results

Summary of Contents for 878-M PREMIUM

Reviews:

Related manuals for 878-M PREMIUM

Brands by name

Popular brands