DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Page: 68 / 130

Programming
66 Service Instructions 878-M PREMIUM - 03.0 - 10/2019
17.3 Parameter selection (
ParameterCall
) submenu
The submenu is visible only if the ParameterView parameter is active
(
ParameterView
) (

p. 83 ). The settings for a parameter can be changed
directly here.
To change the parameters:
1. Select the menu
Service > ParameterCall
(Service > Parameter
selection).
2. Press the OK button to confirm the selection.

A window appears where the parameter can be selected:
Fig. 56:
ParameterCall
(Parameter selection) submenu
3. Select the level of the desired parameter with the
▲
/
▼
buttons.
4. Use the
►
button to move to the
Cat
category and select the desired
value with the ▲
/
▼ buttons or the number keys. The categories are
explained in the

Parameter list 878-M PREMIUM .
5. Use the
►
button to move to the
Par
parameter and select the desired-
value with the
▲
/
▼
buttons or the number keys. The parameters are
explained in the

Parameter list 878-M PREMIUM .
6. Use the
►
button to move to the fourth value on the far right. This value
may vary, depending on the parameter. It may be a mode or a window
with an action selection.
7. Enter the parameter value and confirm by pressing OK .
Abbreviation Meaning
O Operator
T Technician
+
ParameterCall
Cat Par Mode
01 00 6
T
Lvl