DURKOPP ADLER 878-M PREMIUM Service Instructions Manual Download Page 60

Page: 60 / 130

Setting the safety snap-on coupling

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

15 Setting the safety snap-on coupling

The safety snap-on coupling disengages in the event of the thread jamming
and thus prevents the hook from being misadjusted or damaged.

15.1 Attaching the safety snap-on coupling

Fig. 48: Attaching the safety snap-on coupling

Proper setting

The 4 threaded pins (1) on the two adjusting rings next to the safety snap-on
coupling (3) must be parallel to one another. After the safety snap-on coupling
has disengaged, they are no longer parallel.

Tilt the machine head (



p. 15

Turn the left adjusting ring (2) such that the threaded pins (1) are parallel
to one another.



The safety snap-on coupling latches into place.

WARNING

Risk of injury from moving parts!

Crushing possible.

Switch off the machine before you set the safety
snap-on coupling.

(1)

- Threaded pins

(2)

- Left-hand adjusting ring

(3)

- Safety snap-on coupling

①

② ③

Summary of Contents for 878-M PREMIUM



































































































































Search results

Summary of Contents for 878-M PREMIUM

Reviews:

Related manuals for 878-M PREMIUM

Brands by name

Popular brands

DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Search results

Summary of Contents for 878-M PREMIUM

Reviews:

Related manuals for 878-M PREMIUM

Brands by name

Popular brands