DURKOPP ADLER 878-M PREMIUM, Service Instructions Manual

Page: 11 / 130

Safety
Service Instructions 878-M PREMIUM - 03.0 - 10/2019 9
2 Safety
This chapter contains basic information for your safety. Read the instruc-
tions carefully before setting up or operating the machine. Make sure to
follow the information included in the safety instructions. Failure to do so
can result in serious injury and property damage.
2.1 Basic safety instructions
The machine may only be used as described in these instructions.
These instructions must be available at the machine's location at all times.
Work on live components and equipment is prohibited. Exceptions are
defined in the DIN VDE 0105.
For the following work, switch off the machine with the main switch or
disconnect the power plug:
• Replacing the needle or other sewing tools
• Leaving the workstation
• Performing maintenance work and repairs
Missing or faulty parts could impair safety and damage the machine.
Only use original parts from the manufacturer.
Transport
Use a lifting carriage or forklift to transport the machine. Raise the
machine a max. of 20 mm and secure it to prevent it from slipping off.
Setup
The connecting cable must have a power plug approved in the relevant
country. The power plug may only be assembled to the power cable by
qualified specialists.
Obligations
of the operator
Follow the country-specific safety and accident prevention regulations and
the legal regulations concerning industrial safety and the protection of the
environment.
All the warnings and safety signs on the machine must always remain in
a legible condition. Do not remove!
Missing or damaged warnings and safety signs must be replaced
immediately.
Requirements
to be met by
the personnel
Only qualified specialists may:
• Set up the machine
• Perform maintenance work and repairs
• Perform work on electrical equipment
Only authorized persons may work on the machine and must first under-
stand these instructions.